Toshiba e-studio 160 Operator's Manual For Copying Functions page 23

5
Push the left (lock) side to lock the size selection
lever.
6 Place paper in the cassette.
• Up to 550 sheets of paper (2.4 inches) (recommended by
Toshiba) can be set.
• Do not add paper above the line indicated on the guide.
• Do not use creased, folded, wrinkled or damp sheets of
paper.
Note
Make sure that a gap of approx. 0.5 mm (less than 1 mm in
total) is left between the paper and the side guide. If there is
no gap, this would causes paper misfeeding.
7 Install the cassette into the digital multi function
system.
Tip
Changing the paper size of the cassette alone does not change
the cassette size indication on the display. To change the cassette
size, perform cassette size setting on the Message Display Panel.
Page 1-11
Approx. 0.5 mm
Side guide
Side guide
Approx. 0.5 mm
1
2
3
4
5
6
7
8
9
10
11
12
1-9