Regulatory Compliance - Vidyo VidyoRoom HD-220 User Manual

Company name: Vidyo, Inc. is the responsible party for this product. For Regulatory and Environmental
issues, please use the following contact information:
A. Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient. Therefore, consideration should be
given to installing the equipment in an environment compatible with the maximum ambient temperature
(Tma) of 40° C.
B. Reduced Air Flow – Installation of the equipment in a rack or cabinet should be such that the amount of
airflow required for safe operation of the equipment is not compromised.
C. Mechanical Loading – Mounting of the equipment in the rack or cabinet should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
D. Circuit Overloading – Consideration should be given to the connection of the equipment to the supply
circuit and the effect that overloading of the circuits might have on over current protection and supply
wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this
concern.
E. Reliable Grounding – Reliable grounding (earthing) of rack-mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct connections to the branch
circuit. (e.g., use of power strips).
F. Redundant Power Supplies – Where redundant power supplies are provided with the equipment, each
power supply shall be connected to a separate circuit to optimize the equipment redundancy.
G. Servicing – Prior to servicing the equipment, disconnect all power supplies.
H. Power Supply Cord – The power supply cord is used as the main disconnect device. Ensure that the
socket outlet is located/installed near the equipment and is easily accessible.
I. Circuit Overloading – This product relies on the building's installation for short-circuit (overcurrent)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 20A U.S. (240 VAC, 10A
international) is used on the phase conductors (all current-carrying conductors).
D. Regulatory Compliance
Vidyo, Inc.
7 th Floor
433 Hackensack Ave.
Hackensack, NJ 07601
201-289-8597
79