1080P Configuration With Sony Cameras; Setting The Video Format On The Sony Camera - Vidyo VidyoRoom HD-220 User Manual

Note: The VidyoRoom must be version 2.0.3 or later to support 1080p encode resolutions.
To enable the 1080p/30fps transmit format for calls on the VidyoRoom HD-220 and HD-110, you must
properly configure both the camera and the VidyoRoom.
Prior to connecting the Sony EVI-HD3V or EVI-7V camera to the VidyoRoom, select the resolution desired and
configure the camera to output that video format. To set the camera's resolution, locate the control dial in
the rear of the camera marked SYSTEM SELECT. The numbers on the dial correspond to the video resolution
and frame rates output from the camera to the VidyoRoom.
If you have a VISCA cable connected, set the dial to position 7. The resolution setting on the VidyoRoom will
then be synchronized to the camera (so you do not need to configure the resolution separately on the
camera).

SETTING THE VIDEO FORMAT ON THE SONY CAMERA

You set video format on the back of the camera as shown:
Switch Position
0
1
2
3
4
5
A. 1080p Configuration with
Video Format
1080p / 60 fps
1080p / 30 fps
1080i / 60 fps
720p / 60 fps
720p / 30 fps
VGA/60 fps (Letterbox)
71
Sony Cameras
Sony EVI-3V / EVI-7V
7V Only
7V Only
7V Only
Both
Both
Both