Sony DCR-IP5 Operating Instructions Manual page 169

Types of trouble and their solutions
Symptom
Cause and/or Corrective Actions
No function works though the
l
Disconnect the AC power adaptor from a wall outlet or
power is on. remove the battery, then reconnect it in about 1 minute.
Turn the power on. If the functions still do not work, press
the reset button using a sharp-pointed object. (If you press
the reset button, all the settings (DCR-IP7BT: except the
NETWORK mode settings) including the date and time
return to the default) (p. 190).
While charging the battery pack,
l
Charging is completed.
the CHG lamp does not light up.
l
The battery pack is not properly installed.
- _
+ Install itpioperly (p. is).-
You cannot charge the battery
pack.
While charging the battery pack,
the CHG lamp flashes.
l
The POWER switch is not set to OFF (CHG).
-b Set it to OFF (CHG).
l
The battery pack is not properly installed.
+ Install it properly (p. 18).
l
Something is wrong with the battery pack.
+ Please contact your Sony dealer or local authorized Sony
service facility:
The melody or beep sounds for 5
l
Moisture condensation has occurred.
seconds. + Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize it (p. 179).
* Some troubles have occurred in your camcorder.
+ Remove the cassette and insert it again, then operate
<
your camcorder.
The buttons do not appear on the
l
DISPLAY was pressed.
screen. + Press the center 0 on the control button.
+ Press DISPLAY on your camcorder or on the Remote
Commander (p. 41).
The indicators appear mirror- * The mirror mode is activated.
reversed in the viewfinder or on This is not a malfunction.
the TV screen.
Image data cannot be transferred
l
The USB cable was connected before installation of the
by the USB connection (DCR- USB driver was completed.
IP7BT only). + Uninstall the incorrect USB driver and re-install the USB
r
driver (p. 158).
Your camcorder gets warm.
l
This is not a malfunction.
No image is displayed on the
l
The camcorder cannot be connected to a DV product
screen when connecting with other
ecluiument using the i.LINK cable.
169