Sony DCR-IP5 Operating Instructions Manual page 115

Using a "Memory Stick" - introduction
You can select the moving picture quality mode. The default setting is SUPER FINE.
(1)
Set the POWER switch to MEMORY.
(2) Select FN, then press the center 0 on the control button. The PAGE1 screen
appears.
(3) Select MENU, then press the center 0 on the control button. The menu
appears.
(4) Select a, then press the center 0 or b on the control button.
(5) Select MOVIE SET, then press the center 0 or k on the control button.
(6) Select MOVIEMODE, then press the center 0 or b on the control button.
(7) Select the desired movie mode, then press the center 0 on the control button.
(8) Press DISPLAY to turn off the menu.
MENU
I
115