Dubbing
images
recorded
on the
"Memory
Stick"
onto the tape
- DCR-IP7BT
only
You can dub a still image or title recorded on a "Memory Stick" to a tape. You can also
use the Remote Commander to do this operation.
Before operation
l
Insert a tape to be recorded into your camcorder.
* Insert a "Memory Stick" into your camcorder.
(I) Set the POWER switch to VCR.
(2) Locate the desired recording
start point of the tape, then stop the tape.
(3) Select Cl PB, then press the center 0 on the control button. Next, select the still
image you want to dub by selecting -/+.
(4) Select FN, then press the center 0 on the control button. The PAGE1 screen
appears.
(5) Select PAGE3, then press the center 0 on the control button. The PAGE3
screen appears.
(6) Select m REC CTRL, then press the center 0 on the control button. The KZJ
REC CTRL appears.
2
(7) Select REC START, then press the center 0 on the control button. The
2
camcorder
starts dubbing.
To pause the dubbing,
select REC PAUSE, then
3
press the center 0 on the control button.
s
(8) When you try to dub another image, select -/+,
then press the center 0 on the
4
control button and carry out step 7.
,
143