Sony DCR-IP5 Operating Instructions Manual page 113

Usina a "Memorv Stick" - introduction
You can select the image quality mode for still image recording. The default setting is
FINE.
(1) Set the POWER switch to MEMORY.
(2) Select FN, then press the center 0 on the control button. The PAGE1 screen
appears.
(3) Select MENU, then press the center 0 on the control button. The menu
appears.
(4) Select Kl, then press the center 0 or b on the control button.
(5) Select STILL SET, then press the center 0 or b on the control button.
(6) Select QUALITY, then press the center 0 or b on the control button.
(7) Select the desired image quality mode, then press the center 0 on the control
button.
(8) Press DISPLAY to turn off the menu
113
a