Using a "Memory
Stick"
- introduction
Your camcorder has operation buttons on the screen. Use the control button to operate
the buttons on the screen.
(1)
Set the POWER switch to MEMORY.
(2) Press OPEN to open the LCD panel. Operation
buttons appear on the LCD
screen. You can switch the memory playback/memory
camera modes by
selecting PLAY /CAM.
(3) Select FN, then press the center 0 on the control button. The PAGE1 screen
appears. Operation
buttons appear on the screen.
(4) Select PAGE2, then press the center 0 on the control button. The PAGE2
screen appears. Operation
buttons appear on the screen.
(5) Select PAGE3, then press the center 0 on the control button. The PAGE3
screen appears. Operation
buttons appear on the screen.
(6) Select a desired operation
item, then press the center 0 on the control button.
Refer to the relevant pages for each function.
3-6
: I
FN
*
In memory camera
mode
~.~*.vei~~*
2
In memory camera
mode
In memory playback
mode (still image)