Sony DCR-IP5 Operating Instructions Manual page 107

Changing the menu settings
Icon/item
Mode
Meaning
POWER
switch
k% DATA CODE*
0 DATE/CAM
To display date, time and various settings
MEMORY
during playback.
VCR
DATE
To display date and time during playback.
AREA SET
To set your area temporarily, when using the
CAMERA
camcorder, in a new location (p. 25). MEMORY
DST SET
0 OFF
ON
To be used when your area is not in daylight
saving time.
To be used when your area is in daylight saving
time.
CAMERA
MEMORY
BEEP
0 MELODY
To output a melody when you start/stop
CAMERA
recording or when an unusual condition occurs
MEMORY
on your camcorder.
VCR
NORMAL
To output a beep instead of the melody.
!2
OFF
To cancel both the melody and beep sound.
z
COMMANDER 0 ON To activate the Remote Commander supplied
3
CAMERA 8:
with your camcorder. MEMORY :
OFF
To deactivate the Remote Commander to avoid
VCR
d
remote control misoperation caused by remote
5
\
*
control of other VCRs.
6
3
DISPLAY
0 LCD
To show the indicators on the LCD screen and CAMERA 8
viewfinder.
MEMORY $
&
V-OUT/LCD
To show the indicators on the TV screen, LCD
VCR
screen and viewfinder.
REC LAMP
l ON
OFF
To light up the camera recording lamp at the
front of your camcorder.
To turn the camera recording lamp off so that
the subject is not aware of your recording.
CAMERA
MEMORY
* Using the Remote Commander only
Note
If you press DISPLAY with "DISPLAY" set to "V-OUT/LCD" in the menu settings, the
picture from the TV or VCR will not appear on the screen even when your camcorder is
connected to outputs on the TV or VCR.
Even if the power source is detached from the camcorder
The menu items settings will be retained even if you remove the power source.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is too close. In this case, we recommend you
set REC LAMP to OFF.
107