U004Xx Error Code Table: Interrupted Phase B; U004Xx Error Code Table: Interrupted Phase B - Kyocera Mita KM-2530 Service Manual

3DB

(2-1) U004XX error code table: Interrupted phase B

Error code
U00420 A relay request was received from the host center but interrupted because of a mismatch in
permit ID or telephone number.
U00421 F-code based relay reception was interrupted because of a mismatch in the specified F-code
relay box number.
U00430 Polling request (confidential or reverse) was received but interrupted because of a mismatch in
permit number. Or, F-code based bulletin board transmission request was received but
interrupted because of a mismatch in permit ID in the transmitting unit.
U00431 Confidential polling transmission was interrupted because the specified confidential box No. was
not registered. Or, an F-code based bulletin board transmission was interrupted because the
specified F-code confidential box was not registered.
U00432 Confidential polling transmission was interrupted because of a mismatch in confidential box ID
number. Or, an F-code based bulletin board transmission was interrupted because of a
mismatch in F-code confidential box numbers.
U00433 Confidential polling request was received but data was not present in the confidential box. Or, F-
code based bulletin board transmission request was received but data was not present in the F-
code confidential box.
U00434 Confidential polling request was received but interrupted because the specified confidential box
No. was intended for encryption.
U00435 Confidential polling request was received but interrupted because the specified confidential box
was being accessed. Or, F-code based bulletin board transmission request was received but
interrupted because the specified F-code confidential box was being accessed.
U00440 Confidential reception was interrupted because the specified confidential box No. was not
registered. Or, F-code based confidential reception or F-code based relay reception was
interrupted because the specified F-code box was not registered. Or, F-code based confidential
reception or F-code relay command reception was interrupted because the specified F-code box
No. was being accessed.
U00441 Confidential reception was interrupted because the specified confidential box No. was intended
for encryption.
U00450 The destination unit in password check transmission mode interrupted transmission because of a
mismatch in permit ID.
U00460 Encrypted reception was interrupted because the specified encryption box number was not
registered. Or, encrypted reception request was received but interrupted because the specified
encryption box was being accessed.
U00462 Encrypted reception was interrupted because the encryption key for the specified encryption box
was not registered.
1-4-4
Description