YASKAWA VS mini C Series Instruction Manual page 69

Terminal Description
Name Function___
AC power supply input L1(R) and N/L2 (S)for single-phasepowersupply
Inverter output For inverter output
Braking resistor c onnection For brakingresistorconnection
Forgrounding (grounding resistance should be
Grounding 100Q or less) -
Runs when CLOSED, stops
Fon_'ardrun/stop when OPEN
4
/
Reverse run/stop when OPEN -_24VDC 8mA,
MultJ-fucotion c ontactinput." FactoryI_esel is "External l ault Jinsulation "
(NO contact)input" -I
Multi-fanction contactinput3 speed reference 1•
Sequence common input
+t 2V (allowaple current : max. 20mA)
Frequency reference input 0to t0VDC(20k.Q) or4to20mA(250_)
Frequency reference input OV
Factory reset is
Analogmonitoroutput * "Output _ equency" ]O to 10VDC
0V ]2mA or less
J-.
"I
Factorypreset is JContantcapacity :
qC contact output "Duringrunning" J25.0VAC..1A o! less250VAC. 1A or less
3ontactoutputcommon
=holocoupleroutput Factorypreset is |Ph tocoPhotocoupler output:
i
• Analog monitor is a terminal to monitor exclusively
for frequency meter or ammeter.
Do not use it as a control signal for feedback control, etc.
The factory preset of signal level is 0 to +3VDC. By selling a constant, 0 to +IOVDC
output is available.
69