Wiring; Wiring Instructions; Wire And Terminal Screw Sizes - YASKAWA VS mini C Series Instruction Manual

4. WIRING
.. Wiring Instructions
(1) Connect the power supply wiring to terminals L I(R), N/L2(S) and L3(T)
on the main circuit input side (top of the inverter).
Inverter Power Supply Specifications
200V3-phase Inpul 1200VSingle-/3-phaseInpel PowerSupply Specification 100VSingle-phaseIflput
PowerSupply PrOduct PowerSupply Specificatiol
SpecificationProduct I CIMRoXC23E2_SZ3 Product
' CIMFI-XC--2_ ' CIMR-XC_a-- _
Connectto L1(R). 3-phase input : Connectto LI(R), N/L2(S),L3(T) Connectto LI(R), N/L2.(5)
N/L2(S).L3(1) Single-phaseinput : Connectto LI(R), N/L2(S)
(2) Connect the motor wiring to terminals U, V and W on the main circuit
output side (bottom of the inverter).
(3) Separate the inverter wiring from the motor wiring - 328ft (100m) max.
If the wiring distance between inverter and motor is long, reduce the
inverter carrier frequency. For details, refer to "Reducing motor noise
or leakage current (n37)" on page 42.
(4) Control wiring must be less than 164fl(5om) in length and separate from
the power wiring. Use twisted-pair shielded wire when inputting the
frequency signal externally.
" Wire and Terminal Screw Sizes
Wire
Circuit Model Terminal Symbol 3o'e_ Size
mEn 2 _WG Type
CIMR-XC_7 :_,S, T, 81, [32,
_ZIZIT_I 0.75 to 2 18 to 14 600Vvinyl-
Vlain (Ja_qn use) J, V, W, (_ M3,5 sheathed m
rtOOV sing_phase:_ qgOVsing_-pt_ase wire or
Circuit CIMR-X_ZI _1, N/L2., L3, B1. B2 } equivalent
E/ISl-[I
1.25Io 2
16to 14
(F_urope use J,V,W,
_F. SR, $1. $2, $3, twisted : 0,5 to 075 Twisted : 20 to t8
3C, FS, FR, FC, AM, _hielded
._,ontrolCommon 5ingle: O.Sto t 25 Single : 201o 16
2ircuit to all a.C, PA, PC -- wire or
models Fwisted: 05 to t 25 Twisted: 20to 16 equivalent
VIA, MB, MC
3ingle : 05 to 125 Single: 20 to 16
16