To Match Light The Grill - Jenn-Air 720-0339 User Manual

TO MATCH LIGHT THE GRILL

If the burner will not light after several attempts using the control knobs, the burner may be lit with a
match.
1. If you have already attempted to light the burner with the igniter, allow 5 minutes for any
accumulated gas to dissipate.
2. Insert a match into the lighting rod. Ignite the match and insert through the cooking grids to the
burner.
3. Press the control knob and rotate left to the "HI" setting, continue to press the knob until the
burner ignites. The burner should light immediately.
4. If the burner does not light within 4 seconds turn the knob to the "OFF" position, wait 5 minutes
and try again.
WARNING
When lighting, keep your face and hands as far
away from the grill as possible.
CAUTION
When using a match to light the grill make sure
to use the attached lighting rod.
18
Lighting Rod