Lighting Illustrations - Jenn-Air 720-0339 User Manual

LIGHTING ILLUSTRATIONS

MAIN & SIDE BURNER LIGHTING
1. Open the top cover or lid.
2. Turn the main burner control knobs to the
"IGNITE / HI" setting. Push the control knob
until the burner ignites; you should hear a
"clicking" sound if the electronic ignition
system is working properly. The burner should
ignite within 4 seconds (if burner does not
ignite follow match lighting instructions on
Page 18).
3. Once the burner ignites, adjust the
temperature level as desired.
4. Push and turn side burner to "IGNITE/HI"
setting, hold in until the burner ignites. (if
burner does not ignite follow match lighting
instructions on Page 18).
ROTISSERIE BURNER & SEAR BURNER
LIGHTING
1. Push and turn rear burner knob slowly to
"IGNITE / ON" setting, hold in until the burner is
lit up, continue to press and hold for 15 seconds
and release. You should hear a "clicking" sound
if the electronic ignition system is working
properly. The burner should ignite within 4
seconds.
(if burner does not ignite follow match lighting
instructions on Page 18).
2. Push and turn searing main burner knob to
"IGNITE / HI" setting, hold in until the burner
ignites. The burner should ignite within 4
seconds. After ignition, continue to press and
hold for 15 seconds and release. (if burner does
not ignite follow match lighting instructions on
Page 18).
17