Adding A Wireless Network Connection To A Usb-Connected Computer; Changing From Usb To A Wireless Connection - Kodak HERO 3.1 Extended User Manual

Adding a wireless network connection to a USB-connected computer

Changing from USB to a wireless connection

On a computer with MAC OS:
1. Select Apple > System Preferences.
2. Under Hardware, select Print & Fax or Print & Scan .
3. Click + in the dialog box.
4. Select your printer from the list.
5. Click Add , if required.
You can change the way you connect to your printer at any time.
To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
1. Disconnect the USB cable from your printer and computer.
2. If you have not already done so, connect your printer to your wireless network.
See Connecting to a wireless network, page
3. On your computer, disable any firewall you have installed until you have
successfully connected your printer.
4. Select Start > All Programs > Kodak > Kodak Printer Setup Utility.
• If your wireless printer (example: KodakHERO3.1+0034) is not listed:
a. Select No, my printer is not listed, then click Next.
b. Select your printer from the list, then click Next .
c. Select Network - Wireless/Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless printer (example: KodakHERO3.1+0034) is listed:
a. Select the printer that is connected to your network, then click Next .
b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
5. When driver installation is complete, click Done.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakHERO3.1+0034).
www.kodak.com/go/aiosupport
KODAK HERO 3.1 All-in-One Printer
6.
13