Adding A Wireless Network Connection To A Usb-Connected Computer; Changing From Usb To A Wireless Connection; Connecting With Wi-Fi Direct - Kodak HERO 4.2 Extended User Manual

Networking Your Printer

Adding a wireless network connection to a USB-connected computer

You can change the way you connect to your printer at any time.

Changing from USB to a wireless connection

To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
1. Disconnect the USB cable from your printer and computer.
2. If you have not already done so, connect your printer to your wireless network. See
network, 7.
3. On your computer, disable any firewall you have installed until you have successfully completed the installation.
4. Select Start > All Programs > Kodak > KODAK Printer Set-Up Utility.
If your wireless printer (example: Kodak HERO 4.2+XXXX) is not listed:
a. Select No, my printer is not listed, then click Next.
b. Select your printer from the list, then click Next.
c. Select Network - Wireless/Wi-Fi, then click Next. When your printer is detected, driver installation begins.
d. When driver installation is complete, click Done.
If your wireless printer (example: Kodak HERO 4.2+XXXX) is listed:
a. Select the printer that is connected to your network.
b. Select Yes, my printer is listed, then click Next.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, Kodak HERO
4.2+XXXX).
If your printer is connected to a computer with MAC OS:
1. Disconnect the USB cable from your printer and computer.
2. If you have not already done so, connect your printer to your wireless network. See
network, 7.
3. Select Apple > System Preferences.
4. Under Hardware, select Print & Fax or Print & Scan.
5. Click + in the dialog box.
6. Select your printer from the list.
7. Click Add, if required.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, Kodak HERO
4.2+XXXX).

Connecting with Wi-Fi Direct™

Your HERO 4.2 All-in-One Printer can be set up to host a Wi-Fi Direct network so you can connect mobile devices
and computers* without using a router. With Wi-Fi Direct, your printer works as an access point so you can:
12 www.kodak.com/go/aiosupport
Connecting to a wireless
Connecting to a wireless