Updating The Software And Printer Firmware; Updating If Your Printer Is Connected To A Computer With Windows Os - Kodak HERO 3.1 Extended User Manual

Updating the software and printer firmware

Updating if your printer is connected to a computer with WINDOWS OS

Using the latest software and firmware helps ensure optimal performance of your
printer.
NOTE: Firmware is the software that runs on your printer.
Although there is an automatic background check for software and firmware
updates when your computer is connected to the Internet, you may update manually
using the following procedure.
To update the software:
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software, then select Printer Tools.
NOTE: If you do not have Home Center Software, select Start > All Programs >
Kodak > KODAK AiO Printer Tools .
3. Under Printer Resources, click Check for Software Updates to check whether
software updates are available.
4. If there are updates, click Next and follow the on-screen instructions.
To update the firmware:
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable or wirelessly (if not
currently connected).
3. Open Home Center Software, then select Printer Tools.
4. Make sure that KODAKHERO3.1+xxxx - Connecte d (or a similar name with
Connected) appears in the lower left corner of the Printer Tools window.
NOTE: If KODAKHERO3.1+xxxx - Connected does not appear in the lower left
corner, click Select, click Refresh List and choose your printer from the
list; click OK and follow the on-screen instructions.
5. Under Printer Resources, click Check for Printer (Firmware) Updates.
6. If there are updates, click Next and follow the on-screen instructions.
Do not turn off or disconnect your printer or your computer during the
IMPORTANT:
update. Doing so may cause the printer to become inoperable. If the printer
is connected wirelessly, make sure you have a stable connection when you
perform the update. During the upgrade, your printer will restart. Wait for
the message, "Update complete! You may now use your Kodak Printer" to
appear on your computer.
www.kodak.com/go/aiosupport
KODAK HERO 3.1 All-in-One Printer
75