Changing The Settings And Printing Pictures - Kodak HERO 3.1 Extended User Manual

Printing

Changing the settings and printing pictures

32
2. Insert the memory card into the memory card slot, then press
Photos, then press OK.
3. Press or to display the picture you want to print.
4. Press Start to begin printing.
The printer prints one 4 x 6 in. / 10 x 15 cm picture.
To prevent loss of data from your memory card, do not remove it from the
IMPORTANT:
printer while printing.
You can change the print photos options for an individual picture or group of
pictures, or you can change the settings and save them as the default.
To print a picture or pictures using settings other than the default settings:
1. Load photo paper ( short side first ) into the center of the paper input tray with
the glossy side toward you (see
paper-edge guides until they touch the paper.
www.kodak.com/go/aiosupport
memory card slot
Loading photo paper, page
to select View
24), and move the