Effect Parameters - Roland GAIA Synthesizer SH-01 Owner's Manual

Parameter Range
CUTOFF
RESONANCE
KEY FOLLOW
ENV-A
FILTER
ENV-D
ENV-S
ENV-R
ENV-DEPTH
LEVEL
ENV-A
AMP ENV-D
ENV-S
ENV-R
CONTROL 1
EFFECTS
LEVEL
PORTAMENTO-TIME
BENDER
MODULATION
OTHERS
POLARITY

Effect Parameters

Parameter Range
Drive
Type
[DIST]
Presence
Level
Drive
Type
[FUZZ]
Presence
Level
Sample Rate
Bit Down
[BIT CRASH]
Filter
Level
Feedback
Depth
[FLANGER]
Rate
Level
Resonance
Depth
[PHASER]
Rate
Level
Explanation
Modify the cutoff frequency of the filter. (p. 33)
Modify the amount of emphasis for the overtones in the region of the cutoff frequency (p. 34).
Modify the extent to which the cutoff frequency is affected by the keyboard position (p. 34).
Modify the attack time of the filter envelope (p. 35).
Modify the decay time of the filter envelope (p. 35).
Modify the sustain level of the filter envelope (p. 35).
Modify the release time of the filter envelope (p. 35).
Modify the amount by which the cutoff frequency is controlled by the filter envelope (p. 35).
Modify the volume (p. 35).
Modify the attack time of the amp envelope (p. 35).
Modify the decay time of the amp envelope (p. 36).
Modify the sustain level of the amp envelope (p. 36).
Modify the release time of the amp envelope (p. 36).
Perform the same operation as the panel [CONTROL 1] knob (p. 38).
Perform the same operation as the panel EFFECTS [LEVEL] knob (p. 38).
Modify the portamento time (p. 20).
Apply the pitch bend effect. (p. 19).
Apply modulation (p. 19).
Determine the polarity of the D BEAM (p. 22).
When setting the D BEAM ASSIGN parameter, move the knob or slider to specify the direction in which
value changes are to take place.
Explanation Explanation
0–127 Adjusts the depth of distortion.
1–6 Selects the type of distortion.
Adjusts the tone for the ultra high
0–127
frequency range.
0–127 Adjusts the volume.
0–127 Adjusts the depth of distortion.
1–6 Selects the type of distortion.
Adjusts the tone for the ultra high
0–127
frequency range.
0–127 Adjusts the volume.
0–127 Adjusts the sample rate.
0–127 Adjusts the bit depth.
0–127 Adjusts the filter depth.
0–127 Adjusts the volume.
Adjusts the proportion of effect
0–127
sound that is returned to the input.
0–127 Adjusts the depth of modulation.
0–127 Adjusts the speed of modulation.
0–127 Adjusts the volume.
Determines the amount of
0–127
resonance.
0–127 Adjusts the depth of modulation.
0–127 Adjusts the speed of modulation.
0–127 Adjusts the volume.
Panel operation
Turn the [CONTROL 1] knob.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
Hold down the [CANCEL/SHIFT] button and turn the EFFECTS
[LEVEL] knob.
Turn the EFFECTS [LEVEL] knob.
Turn the [CONTROL 1] knob.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
Hold down the [CANCEL/SHIFT] button and turn the EFFECTS
[LEVEL] knob.
Turn the EFFECTS [LEVEL] knob.
Turn the [CONTROL 1] knob.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
Hold down the [CANCEL/SHIFT] button and turn the EFFECTS
[LEVEL] knob.
Turn the EFFECTS [LEVEL] knob.
Turn the [CONTROL 1] knob.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
Hold down the [CANCEL/SHIFT] button and turn the EFFECTS
[LEVEL] knob.
Turn the EFFECTS [LEVEL] knob.
Turn the [CONTROL 1] knob.
Hold down the [CANCEL/SHIFT] button and turn the [CONTROL
1] knob.
Hold down the [CANCEL/SHIFT] button and turn the EFFECTS
[LEVEL] knob.
Turn the EFFECTS [LEVEL] knob.
49