Roland GAIA Synthesizer SH-01 Owner's Manual page 53

Parameter Range
SOFT THRU OFF, ON
MIDI RX
RX PROGRAM CHANGE OFF, ON
RX BANK SELECT
OFF, ON
REMOTE KEYBOARD OFF, ON
MIDI TX
TX PROGRAM CHANGE OFF, ON
TX BANK SELECT OFF, ON
TX EDIT DATA
OFF, ON
Explanation
If this is on, MIDI messages received at the MIDI IN
connector will be re-transmitted from the MIDI OUT
connector without change.
If this is on, the patch number will change when a
program change message is received.
If this is on, the patch group (preset/user) will change
when a MIDI bank select message is received.
This specifies whether note messages received via
MIDI or USB MIDI will be handled in the same way as
notes played on the GAIA SH-01's own keyboard. If
this is on, note messages from an external device can
trigger arpeggios.
If this is on, a program change message will be
transmitted when you press one of the NUMBER
[1]–[8] buttons or the [BANK] button.
If this is on, a MIDI bank select message will be
transmitted when you press the [PRESET PATCH]
button or the [USER PATCH] button.
If this is on, patch edits you make will be transmitted
as system exclusive messages.
Panel operation
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the FILTER [SLOPE] button and press the
[EFFECTS ON/OFF] button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [REC] button and press the [PRESET PATCH]
button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [REC] button and press the [USER PATCH]
button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [REC] button and press the [ARPEGGIO]
button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [PLAY/STOP] button and press the [PRESET
PATCH] button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [PLAY/STOP] button and press the [USER
PATCH] button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
1. Hold down the [CANCEL/SHIFT] button and press the
[V-LINK] button.
2. Hold down the [PLAY/STOP] button and press the [EFFECTS
ON/OFF] button.
Button lit: ON
Button unlit: OFF
3. Press the [CANCEL/SHIFT] button.
53