Choosing The Phrase To Play Back; Playing Or Stopping The Phrase; Using A Pedal; Sustaining The Notes (Hold) - Roland GAIA Synthesizer SH-01 Owner's Manual

Choosing the phrase to play back

Here's how to select a phrase that's saved in internal
memory or USB memory.
1. Hold down the [REC] button.
While you hold down the [REC] button, the NUMBER
[1]–[8] buttons will select phrases.
To select a phrase that's saved in USB memory, hold down
the [REC] button and press the USB MEMORY [PATCH]
button so it's lit.
If this button is unlit, you'll be selecting phrases that are
saved in internal memory.
The NUMBER button for the currently selected phrase
number will blink, and the other seven NUMBER buttons
will light.
2. Continue holding down the [REC] button, and
press the NUMBER [1]–[8] button of the phrase
that you want to play back.
The NUMBER button you pressed will blink, and the other
NUMBER buttons will light.
3. Take your finger off the [REC] button.
The phrase has now been selected.
If playback is still taking place when you select a phrase,
the selection will be switched after the previous phrase
has finished playing.

Playing or stopping the phrase

1. Press the [PLAY/STOP] button.
The currently selected phrase will start playing.
The phrase will continue playing repeatedly until you press
PLAY/STOP once again.
2. Press the [PLAY/STOP] button once again to stop
phrase playback.
* No data for the phrase that is played will be output from
MIDI OUT.
26

Using a Pedal

If you connect a pedal switch (DP series, FS-5U; sold
separately) or expression pedal (EV-5; sold separately)
to the rear panel PEDAL jack, you can use it to control a
variety of functions that you've assigned.

Sustaining the Notes (HOLD)

If you connect a pedal switch (DP series, FS-5U; sold
separately), the notes will be sustained as long as you
continue holding down the pedal even after you take your
hands off the keyboard.
Setting things so a pedal switch can
be used to sustain the sound
1. Hold down the [CANCEL/SHIFT] button and press
the [V-LINK] button.
2. Hold down the [PORTAMENTO] button and press
one of the NUMBER [1] buttons.
3. Press the [CANCEL/SHIFT] button.
• MODULATION
• VOLUME
• BEND MODE
• D BEAM SYNC
• TAP TEMPO