Roland GAIA SH-01 System Update

GAIA SH-01 System Update Version 1.04
This system program updates your GAIA SH-01 to the latest version 1.04.
How to know the version
Before you start, check the system program version of your GAIA SH-01.
1. Switch on the power to the unit.
2. Hold down [CANCEL/SHIFT] and press [TRANSPOSE].
3. The [TRANSPOSE] Button flashes and the version number of the
program is displayed using the indicators.
○ Ver.1.02: The [CANCEL/SHIFT] button, the WRITE
PROTECT indicator and the [NUMBER 2] button light.
○ Ver.1.03: The [CANCEL/SHIFT] button, the WRITE
PROTECT indicator and the [NUMBER 3] button light.
○ Ver.1.04: The [CANCEL/SHIFT] button, the WRITE
PROTECT indicator and the [NUMBER 4] button light.
In this case, there's no need to update it.
4. After verifying the version, press [CANCEL/SHIFT].
5. The unit returns to normal operation.
Update history
［ Ver.1.04 ］
● Improved the Power Save Mode so that it does not function while an
arpeggio is performing.
● Improved the behavior when shutting down a personal computer
connected with SH-01 via USB.
* This does not guarantee that all personal computer will operate
correctly with SH-01.
［ Ver.1.03 ］
● Supported the GAIA SYNTHESIZER SOUND DESIGNER (SD-SH01).
● Added a System parameter which can set the PCM sound generator
parts to OFF.
(GAIA SH-01 comes with a multitimbral PCM sound generator (Number
of parts: 15) that supports GM2 sound mapping in addition to a Virtual
analog synthesizer sound generator (Number of part: 1).)
The procedure for setting the System parameter is the followings. The
parameter is called "GM Parts Switch".
© 2012 Roland Corp. U.S.