Memory/Processor Problems - Gateway ALR 8200R User Manual

Memory/Processor Problems

Memory errors were detected during system start up.
Probable Cause
Memory was added or
removed, and the new
configuration was not
saved in BIOS Setup.
The memory was installed
incorrectly.
A memory chip is faulty.
A new processor is not recognized by the system.
Probable Cause
The processor was
installed incorrectly or in
the wrong socket.
The processor speed was
not selected on the system
board.
A pin was bent on the
processor during
installation.
Solution
Enter BIOS Setup and save the new memory
configuration.
Check the memory for proper seating and
orientation.
Replace the card with the faulty chip. (Third-party
diagnostic programs can help determine which
chip or memory segment is failing.)
Solution
Check the installation. The processor should be
recognized automatically if it was installed
correctly.
If your system board lets you to select the
processor speed, make sure you have selected the
proper speed.
Remove the processor and inspect it for damage.
If a pin is bent, very carefully try to straighten it.

Memory/Processor Problems

105