Memory and processor problems
The system detected memory errors during start up.
Probable cause
Memory was added or
removed, and the new
configuration was not saved
in BIOS Setup utility
The memory was installed
incorrectly
A memory chip is faulty
The system does not recognize a new or second processor.
Probable cause
The processor was installed
incorrectly or was not seated
correctly in the socket
Solution
Open the BIOS Setup utility and save the new
memory configuration.
Make sure the memory is seated and oriented
correctly.
Replace the card with the faulty chip.
Third-party diagnostic programs can help
determine which chip or memory segment is
failing.
Solution
Check the installation and make sure the
processor is fully seated in the socket. The
processor should be recognized automatically
if it was installed correctly.
Memory and processor problems
111