Gateway ALR 8200R User Manual page 125

Error Message
Diskette read failed - strike
to retry boot.
Gate A20 failure.
Hard disk controller failure.
Hard disk controller failure -
press to try reboot.
F1
Insert bootable media
device.
Insufficient disk space.
Invalid configuration
information...
•
F1
Make certain the boot disk contains the
Command.com file.
•
Use the configuration utility (if applicable) to
verify your drive or controller configuration.
•
Press to try the boot again.
F1
You may have an XT keyboard connected to an
AT system or vice versa. Make certain the
keyboard is configured to work with the
appropriate system. Some keyboards have a
switch to select either AT or XT.
•
Make certain the hard disk cable is properly
connected.
•
Open the BIOS Setup program and verify
that the correct drive type is selected.
•
The drive controller may be defective. Press
to retry the boot.
F1
•
Try running Fdisk and DOS Format. For
more information, refer to your DOS
documentation.
•
See "The IDE drive is not recognized by the
system." on page 104.
•
See "The SCSI drive is not recognized by the
system." on page 104.
•
Backup your files as soon as possible.
•
Check the free space on the disk volume. If
the volume is full or almost full, remove
unnecessary files.
•
Enter BIOS Setup and verify the parameter
values.
Solutions
Error Messages 115