Settings; Setting The Time - Silvercrest URC 101 DT Operation And Safety Notes

Settings

The basic display shows the day of the week and the
time on the lower line.
If the setup button (17)
will appear on the lower line for approximately 30
seconds.

Setting the time

Hold down the setup (17)
seconds until
Press the setup button (17)
up
Confirm with OK (12)
Select the
buttons (13)
The current time mode will flash. Choose a time mode
(12 or 24 hours) using the navigation buttons (13)
(HR = Hours) and confirm with OK (12)
end of this section).
.
.
menu using the navigation
and confirm with OK (12)
is briefly pressed the date
button for about 3
is shown.
once more to bring
. The display will show
.
(see the
37