Reverting The Punch Through (Vol/Mute) Back To Factory Settings - Silvercrest URC 101 DT Operation And Safety Notes

Press OK (12)
shown.
Choose the
buttons (13)
universal function VOL/MUTE for one individual device
which you will select in the next step.
Press OK (12)
appear on the display.
Select the device that you wish to retain its own
VOL/MUTE operation (excluding
the source buttons (2).
The message
Reverting the Punch Through (VOL/MUTE) back
to factory settings
If you have altered the "Punch Through" function
VOL/MUTE as described in the previous two sections you
can do the following to revert this function back to factory
settings.
Hold down the setup (17) button
seconds until
34
again. The
menu using the navigation
. This menu allows you to turn off the
again. The question
will be shown shortly after each other.
) by using one of
and the confirmation
is shown.
menu will be
will
for about 3