Silvercrest URC 101 DT Operation And Safety Notes page 31

recorder. There are several ways of controlling combi
devices.
Combi devices with two device codes
Certain combi devices (e.g. a TV with a video recorder)
require two codes for each part of the device. Program
the appropriate TV code onto the TV source button and
the code for the video recorder onto another source
button. Operate the combi device like two separate
devices.
Combi devices with one device code
Other combi devices only require one code. First you
must select the part of the device that you wish to use
next.
Example: The device is a combined DVD recorder /
Video recorder. The device code is stored under the
source button.
To operate the DVD part of the combi device press and
hold the source button for longer than a second.
To switch to using the video recorder in the combi device,
briefly press the setup button for the shift function, then
the source button.
If your combi device only requires one device code, but
you wish to use it with two source buttons, one for each
part of the device, then proceed as follows:
29