Silvercrest URC 101 DT Operation And Safety Notes page 15

To set the time and date please read the Settings chapter
on page 37.
After battery insertion the mode, time, date, and the back
light duration will revert back to the factory settings.
After you have inserted the batteries you can begin to
program your universal remote control with your devices.
With the common infra red codes the remote control
works with most but not all makes and models.
This remote control offers functions that your device
might not be able to use. Some special functions of your
device may not be supported by the remote control. In
this case it can learn the commands from your original
remote control using the learning function and transfer
them to itself.
It may be that some of the functions of the device must
be implemented differently on the universal remote than
on the original remote. Please read these instructions
completely before use to get to know all the options of
your remote control. Also read the instructions of the
devices that you wish to operate with the remote control
13