Programming Punch Through (Vol / Mute) Onto Another Type Of Device - Silvercrest URC 101 DT Operation And Safety Notes

Programming Punch Through (VOL / MUTE) onto
another type of device
You can set up the universal remote control so that the
Punch Through function operates another device rather
than the TV. The device must obviously have a volume
control function.
Hold down the setup (17) button
seconds until
Press the setup button (17)
up
Press OK (12)
Press OK (12)
appear. This menu allows you to program all
VOL/MUTE commands of one type of device which
you will select in the next step.
Press OK (12)
appear on the display.
Select the device that you wish the VOL/MUTE
operation to be changed by using one of the source
buttons (2).
The message
If a device was selected in error that does not have its
32
.
. The display will show
again. The
again. The question
will be shown shortly after each other.
is shown.
once more to bring
and the confirmation
for about 3
.
menu will
will