Silvercrest URC 101 DT Operation And Safety Notes page 27

Press OK (12)
Press the desired source button (2) (TV, VCR, CBL,
ASAT, DSAT, DVD, AUX1, CD, AMP, AUX2). The
display will show
Select the device type that is to be programmed to this
source button using the navigation buttons (13)
(When selecting the
select the type of device because the source button
can only be programmed with TV codes.)
Press OK (12)
Carry out a functional test by pressing the CH+ (11) or
the PLAY (9) button (only for video recorders) several
times (up to 350 times) until the device changes the
channel or otherwise responds accordingly.
The code search begins with the current saved code.
During the search the display will show
(along with the chosen type of device). If you miss the
code, you can go backwards step by step using the
CH- (11) button.
When the device reacts to buttons being pressed,
press OK (12)
message
will revert back to normal use.
. The display will show
.
button there is no option to
. The display will show
to save the code. The confirmation
will be shown. The remote control
.
.
.
25