Wyse WY-60 Maintenance Manual page 20

316X- and AT-Style Keyboard Replacement
Tools required:
None
To replace the keyboard (see Figure 2-4), follow these steps:
1. Turn off the terminal.
2. Press the keyboard cable connector tab and pull the keyboard
cable out of the keyboard.
3.
Plug the keyboard cable into the new keyboard's connector.
316X- and AT-Style Keyboard Cable Replacement
Tools required: None
To replace the keyboard cable (see Figure 2-4), follow these
s te ps :
1. Turn the terminal off.
2. Press the keyboard cable connector tab and pull the keyboard
cable out of the keyboard.
3.
Press the other keyboard cable connector tab and pull the
keyboard cable out of the left side of the terminal.
4. Insert one end of the new keyboard cable into the keyboard
connector. Insert the other end into the terminal keyboard
socket.
316X- and AT-Style Keyboard PCB Replacement
Tools required:
o No. 0 Phillips screwdriver
o No.2 Phillips screwdriver
To replace the keyboard PCB (see Figure 2-4), follow these steps:
1. Turn off the terminal.
2. Unpl ug the keyboard cable from the keyboard.
3. Turn the keyboard over and remove the six No.2 Phillips
screws that attach the keyboard bottom cover to the
keyboard.
4. Lift off the keyboard bottom cover.
2-7