Wyse WY-60 Maintenance Manual page 13

To change the parameters, follow these steps:
1. Enter setup mode by pressing the SHIFT and SETUP keys.
(Press the SHIFT and SYS REQ keys on the AT-style keyboard.)
2. Press one of the designated function keys (F1 through F10).
The menu assigned to that function key will appear on the
screen.
3.
Press the cursor keys until the specific parameter to be
changed is highlighted.
4.
Press the SPACEBAR to advance the parameter to the specific
setting desired.
5.
Press the cursor keys as required to advance to the next
parameter to be changed.
6.
To leave setup mode, either press the SHIFT and SETUP keys
or the F10 key. In all levels other than the top setup
level, you must press these keys twice.
The terminal is now operational using the parameters defined in
the setup mode.
See the
~Y-60
User's Guide for more comprehensive setup
instructions.
CARE
You may find that the terminal needs to be cleaned when you've
finish servicing it. The screen should be cleaned with a soft,
lint-free cloth. Apply a safe cleaner to the cloth, not directly
to the screen.
Caution--Don't ever clean the screen with chemical substances,
abrasives, or commercial glass cleaners that contain alcohol.
1-6