Wyse WY-60 Maintenance Manual page 18

Figure
2-3
ASCII Keyboard Assembly
Top Cover
ASCII Keyboard Cable Replacement
Tools required:
o No.2 Phillips screwdriver
For Service Menue'e
MAURITRON SERVICES
8 Cherry Tree Roed, Chlnnor
Oxford.hlre, OX9 4QY.
Tel (01844) 351694
Fax (01844) 352554
emall:-maurltron@dlal.plpex.com
To replace the keyboard cable (see Figure 2-3):
1. Turn the terminal off.
2. Press the keyboard cable connector tab and pull the cable
out of the keyboard socket on the side of the terminal.
3. Unscrew the four Phillips screws on the bottom of the
keyboard. Remove the bottom cover.
4. Unscrew the two Phillips screws on the bottom of the exposed
keyboard PCB, holding the PCB to the top cover.
2-5