Idle Screen 6757I Ct Rp - Aastra 6751i RP User Manual

For more information about connecting your phone, see the Aastra 6757i CT RP Phone Installation Guide, the section
"Connecting to the Network and to Power" and the AastraLink RP Administrator Guide.
Check with your System Administrator for assistance.

Idle Screen 6757i CT RP

When the phone has successfully updated the configuration and connected to the network, the phone displays the Idle
State screen. The idle screen is shown whenever your phone is not in use.
Note: Your System Administrator sets up your initial screen name, line number, and any other administrative features
required. You may change some of these options yourself. See Changing your phone settings using Assistant on page 15.
The Idle State screen lists your name (SIP screen name) and day, date, and time. In the above screen, the "L1" indicates John
Smith is configured on Line 1.
The idle screen also displays the following default softkeys located on the top left and top right of the screen:
• Services
• Directory
• Callers List
• Intercom
Services Icom
Dir
Callers
John Smith
L1
103
Sat Jan 1 12:18am
Operator
VoiceMail
When you lift the handset, the screen displays the default bottom softkeys of:
• Dial
• Conference
• Transfer.
Services Icom
Dir
Callers
John Smith
L1
>
Dial
Conf
Xfer
You can configure the 6 top softkeys and the 6 bottom softkeys as required.
For more information about configuring the top default softkeys and all other softkeys, see Programmable Keys (6753i RP &
6757i CT RP) on page 51.
AastraLink RP Phone User Guide 9