Idle Screens 6751I Rp & 6753I Rp - Aastra 6751i RP User Manual

No Service Screen 6751i RP & 6753i RP
When the phone is not properly connected to the network, or the account has not been configured by the System
Administrator, the "No Service" or "Network Disconnected" prompt appears on the display and the telephone status light
turns ON.
2
Thomas Sharp
No Service
Sat Jan 1 12:00a
The phone also displays the default time and date of 12:00am Jan. 1st. Check that the cables are tightly connected to the
phone and to the wall jack. The phone should automatically detect when the connection is reconnected and will display the
"Network Connected" prompt temporarily.
If changes have been made to your phone settings using the Microsoft Response Point Administrator software, your phone
should restart automatically with an initial screen display of "Restarting...", during which time your phone will not be
available to make and receive calls.
For more information about connecting your phone, refer to the AastraLink RP Administrator Guide. Check with your
System Administrator for assistance.
Connected State Screens 6751i RP & 6753i RP
When the phone has successfully connected to the network, The phone screen appears as show below. The "1" in the upper
corner in the above example indicates the idle screen for the first line appearance. You can use the LEFT and RIGHT arrow
keys to scroll through the idle screens on phones with more than one line.
1
John Burns
103
Sat Jun 8 2:55p
When the phone is off-hook, the screen displays as follows.The "1" in the upper corner in the above example indicates the
idle screen for the first line appearance. A "2" will appear for the second line, and so on.
=Dial
Idle Screens 6751i RP
When the phone has successfully updated the configuration and connected to the network, the phone displays the Idle
State screen:
1
John Burns
103
Sat Jun 8 2:55p
The Idle State screen lists your name, extension (or phone number), and day, date, and time. The "1" in the upper corner in
the above example indicates the idle screen for the first line appearance. You can use the LEFT and RIGHT arrow keys to
scroll through the idle screens on phones with more than one line. The phone user assigned to each line is displayed.
2
Janet Hermann
105
Sat Jun 8 2:55p
The Idle State screen is shown whenever your phone is not in use.
6753i RP
&
AastraLink RP Phone User Guide 7