Getting Started; Initializing Phone Models 6751I Rp & 6753I Rp; Initializing Phone Model 6757I Ct Rp - Aastra 6751i RP User Manual

Getting Started

The Aastra IP phones must be set up and configured prior to its first use. This section describes phone behavior and start up
screens you may see when the phone is first plugged in, or when it is restarted.
Initializing Phone Models 6751i RP & 6753i RP
The Aastra IP automatically begins the start up sequence as soon as it is connected. The phone goes through this process the
first time you plug in your phone and every time you restart your phone.
The phone displays the following startup screens.
Aastra 6751i RP
Network
Note: Do not unplug or remove power to the phone while it is checking or installing firmware and configuration information.
When the configuration update is complete, the phone displays the following screen.
Done
If the phone is not yet connected to the AastraLink RP Solution through your LAN, the following "No Service" screen
appears.
1
No Service
Sat Jan 1 12:00a
The 6751i RP or 6753i RP phone is now ready to be added to your AastraLink RP Solution by the System Administrator,
using the Microsoft Response Point Administrator phone system software. Further instructions can be found in the
AastraLink RP Administrator Guide.

Initializing Phone Model 6757i CT RP

The 6757i CT RP automatically begins the start up sequence as soon as it is connected. The phone goes through this process
the first time you plug in your phone and every time you restart your phone.
Aastra 6753i RP
OR
Initializing
network
SIP
AastraLink RP Phone User Guide 5
Downloading
language packs.....
DSP