Speaker
Description
Speaker
The speaker is mounted to the inside front of the chassis with two screws.
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Disconnect the speaker wire from the white system board connector labeled SPKR (1).
4.
From the inside of the unit, remove the two screws (2) that secure the speaker to the front of the
chassis.
5.
Rotate the top of the speaker downward slightly, and then remove it from the chassis (3).
Figure 6-42
To install the speaker, reverse the removal procedures.
110 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis
Removing the speaker
(Preparation for Disassembly on page
(Computer Access Panel on page
Spare part number
645330-001
73).
74).