Changing From A Desktop To A Minitower Configuration - HP 8200 Elite Series Maintenance And Service Manual

10. Reposition the subpanel (rotate it 90º) with the logo at the bottom, then snap it back into the
bezel.
Figure 6-52
11. Replace the front bezel and computer access panel.
12. Reconnect the power cord and turn on the computer.
13. Lock any security devices that were disengaged when the computer access panel was removed.

Changing from a Desktop to a Minitower Configuration

1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the front bezel
4. Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays.
122 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis
Changing from a Minitower to a Desktop Configuration
(Front Bezel on page
(Preparation for Disassembly on page
(Computer Access Panel on page
75).
73).
74).