Power Supply - HP 8200 Elite Series Maintenance And Service Manual

Power Supply

Description
Power supply, 320W, 90% efficient
Power supply, 320W
1. Prepare the computer for disassembly
2. Remove the access panel
3. Disconnect the power cables from the white 6-pin system board connector labeled PWR and the
4-pin white system board connector labeled P3.
4. Remove the power cables from the clip on the base pan.
5. Remove the four silver Torx screws that connect the power supply to the chassis.
Figure 7-34
6. Press the tab (1) on the base pan in front of the power supply that holds it in place.
(Computer Access Panel on page
Power supply screws
(Preparation for Disassembly on page
126).
Spare part number
613764-001
613765-001
73).
Power Supply 161