Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 1027R-72RFTP.
Installation and maintenance should be performed by experienced technicians only.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the serv-
er system and describes the main features of the X9DRW-7TPF serverboard and
the SC119TQ-R700WB chassis, which comprise the SuperServer 1027R-72RFTP.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer into a rack and
check out the server configuration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 1027R-72RFTP.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X9DRW-7TPF serverboard, includ-
ing the locations and functions of connections, headers and jumpers. Refer to this
chapter when adding or removing processors or main memory and when reconfig-
uring the serverboard.
Preface
iii
Preface
Advertisement
Table of Contents
