Removing The Heatsink - Supero SUPERSERVER 1027R-72RFTP User Manual

Removing the Heatsink

Warning: We do not recommend removing the CPU or the heatsink. If you do need
to remove the heatsink, please follow the instructions below to prevent damage to
the CPU or other components.
1. Unplug the power cord from the power supply.
2. Unscrew and remove the heatsink screws in the sequence shown in the
picture below.
3. Hold the heatsink and gently wiggle it to loosen it from the CPU. (Do not use
excessive force when doing this!)
4. Once the heatsink is loosened, remove it from the CPU.
5. Clean the surface of the CPU and the heatsink to get rid of the old thermal
grease. Reapply the proper amount of thermal grease before you re-install
the heatsink.
Loosen screws
in sequence as
shown.
Motherboard
Chapter 5: Advanced Serverboard Setup
Screw#1
Screw#3
5-5
Screw#4
Screw#2