Hdd; Power; Drive Carrier Leds - Supero SUPERSERVER 1027R-72RFTP User Manual

HDD

Indicates IDE channel activity. On the 6016T-6RFT+/6016T-6F+ this light indicates
HDD and/or DVD-ROM drive activity when flashing.

Power

Indicates power is being supplied to the system's power supply units. This LED
should normally be illuminated when the system is operating.
3-4

Drive Carrier LEDs

 Green: Each hard drive carrier has a green LED. When illuminated, this
green LED indicates drive activity. A connection to the SAS backplane enables
this LED to blink on and off when that particular drive is being accessed. Please
refer to Chapter 6 for instructions on replacing failed hard drives.
 Red: The red LED to indicate a hard drive failure. If one of the drives fail, you
should be notified by your system management software. Please refer to Chapter
6 for instructions on replacing failed hard drives.
Chapter 3: System Interface
3-3