Supero SUPERSERVER 1027R-72RFTP User Manual page 70

S S
UPER ERVER 1027R-72RFTP User's Manual
BIOS Write-Protect
Close Pins 1/2 of Jumper JWP1 to
support BIOS Write-Protect to prevent
BIOS Setup utility settings from being
illegally altered. The default setting
is to close 2-3 for normal operation.
See the table on the right for jumper
settings.
Flash Descriptor Security
Overwrite
Close Pins 1/2 of Jumper JPME2 to
support Flash Descriptor Security
Overwrite support which will allow the
user to overwrite flash descriptor se-
curity settings. The default setting is to
close 2-3 for normal operation. See the
table on the right for jumper settings.
I2C Bus to PCI-Exp. Slots
Jumpers JI C1 and JI
2
to connect the System Management
Bus (I C) to PCI-Express slots. The
2
default setting is Open to disable the
connection. See the table on the right
for jumper settings.
I2C Bus to VRMs
Use Jumpers JP6 and JP7 to connect
the System Management Bus (I
VRMs. The default setting is Off to dis-
able the connection. See the table on
the right for jumper settings.
C2 allow you
2
C) to
2
5-24
BIOS Write Protect
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Normal (Default)
Flash Descriptor Security Overwrite
Jumper Settings
Jumper Setting Definition
1-2 Enabled
2-3 Normal (Default)
I C to PCI-Exp
2
Jumper Settings
Jumper Setting Definition
Closed Enabled
Open Disabled (Default)
I C to VRMs
2
Jumper Settings
Jumper Setting Definition
Closed Enabled
Open Disabled (Default)