Super Io Configuration - Supero SUPERSERVER 1027R-72RFTP User Manual

S S
UPER ERVER 1027R-72RFTP User's Manual
BCM57810S 10G OPROM
Select Enabled to boot the computer using the BCM57810S Ethernet device. The
options are Enabled and Disabled.
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer using a network device. The options are PXE and iSCSI.
Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1/LAN2 Option ROM. This is to boot
the computer using a network device. The default setting for LAN1 Option ROM is
Enabled, and the default setting for LAN2 Option ROM is Disabled.
Load Onboard SAS Option ROM
Select Enabled to use the onboard SAS Option ROM to boot the computer using
a SAS device. The options are Enabled and Disabled.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard, and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled
and Disabled.
Super IO Configuration
Super IO Chip: This item displays the Super IO chip used in the motherboard.
7-18