Control Panel Leds; Information Led; Nic2; Nic1 - Supero SUPERSERVER 1027R-72RFTP User Manual

S S
UPER ERVER 1027R-72RFTP User's Manual
3-3

Control Panel LEDs

The control panel located on the front of the SC119TQ chassis has five LEDs. These
LEDs provide you with critical information related to different parts of the system.
This section explains what each LED indicates when illuminated and any corrective
action you may need to take.

Information LED

This LED will be blue when the UID function has been activated. When this LED
flashes red, it indicates a fan failure. When red continuously it indicates an overheat
condition, which may be caused by cables obstructing the airflow in the system or
the ambient room temperature being too warm. Check the routing of the cables
and make sure all fans are present and operating normally. You should also check
to make sure that the chassis covers are installed. Finally, verify that the heatsinks
are installed properly (see Chapter 5). This LED will remain flashing or on as long
as the indicated condition exists.
State
Fast Blinking Red (1x/sec)
Solid Red
Slow Blinking Red (1x/4 sec)
Solid Blue
Blinking Blue
2

NIC2

Indicates network activity on GLAN2 when flashing .
1

NIC1

Indicates network activity on GLAN1 when flashing.
Universal Information LED States
Indication
Fan Fail
CPU Overheat
Power Fail
Local UID Button Depressed
IPMI-Activated UID
3-2