Address Reservation - TP-Link TD-W8970 User Manual

TD-W8970
:
Client Name The name of the DHCP client

:
MAC Address The MAC address of the DHCP client

:
IP Address The IP address that the modem router has allocated to the DHCP client

:
Valid Time The time of the DHCP client leased. After the dynamic IP address has expired,

a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.

4.7.3 Address Reservation

Choose menu "DHCP Server""Address Reservation", you can view and add a reserved
address for clients via the next screen (shown in Figure 4-30).When you specify a reserved IP
address for a PC on the LAN, that PC will always receive the same IP address each time when it
accesses the DHCP server. Reserved IP addresses should be assigned to the servers that require
permanent IP settings.
MAC Address: The MAC address of the PC for which you want to reserve an IP address.

IP Address: The IP address reserved for the PC by the modem router.

Status: The status of this entry either Enabled or Disabled.

To Reserve an IP address:
1. Click the Add New button. Then Figure 4-31 will pop up.
2. Enter the MAC address (in XX:XX:XX:XX:XX:XX format.) and IP address (in dotted-decimal
notation) of the computer for which you want to reserve an IP address.
3. Click the Save button.
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 4-30
Figure 4-31
39