TP-Link TD-W8970 User Manual page 55

TD-W8970
the drop-down list. The default setting is Auto, which can select WPA-PSK or WPA2-PSK
authentication type automatically based on the wireless station's capability and request.
Encryption: You can select Auto, TKIP or AES as Encryption.
•
Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to
•
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the Router or can be found in Figure 4-35.
Group Key Update Period: Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2 – Enterprise: It's based on Radius Server.

Authentication Type: You can choose the type for the WPA/WPA2-Personal security on
•
the drop-down list. The default setting is Auto, which can select WPA-PSK or WPA2-PSK
authentication type automatically based on the wireless station's capability and request.
Encryption: You can select Auto, TKIP or AES as Encryption.
•
RADIUS Server IP: Enter the IP address of the Radius Server.
•
RADIUS Server Port: Enter the port that radius service used.
•
RADIUS Server Password: Enter the password for the Radius Server.
•
Group Key Update Period: Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WEP: It is based on the IEEE 802.11 standard.

Authentication Type: You can choose the type for the WPA/WPA2-Personal security on
•
the drop-down list. The default setting is Auto, which can select WPA-PSK or WPA2-PSK
authentication type automatically based on the wireless station's capability and request.
WEP Key Format: Hexadecimal and ASCII formats are provided here
•
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
46
.
Hexadecimal