Wireless Schedule - TP-Link TD-W8970 User Manual

TD-W8970
WEP Key: Select which of the four keys will be used and enter the matching WEP key that
•
you create. Make sure these values are identical on all wireless stations in your network.
Key Type: You can select the WEP key length (64-bit, or 128-bit.) for encryption.
•
"Disabled" means this WEP key entry is invalid.
64-bit: You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit: You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.

4.8.4 Wireless Schedule

Choose menu "Wireless 2.4GHz""Wireless Schedule", you can configure the Task Schedule
as shown below.
 Note:
The time you set is the period you need the wireless off.
Before configure the wireless schedule, please set system time first which refer to
Settings, then you can enable or disable Wireless Schedule.
Apply To: Select the day or days you want to switch the wireless off.

300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 4-39
47
4.21.2 Time