The Back Panel - TP-Link TD-W8970 User Manual

TD-W8970

1.3.2 The Back Panel

ADSL: Through the port, you can connect the modem router with the telephone. Or you can

connect them by an external separate splitter. For details, please refer to
Modem Router.
USB: The USB port connects to a USB storage device or a USB printer.

LAN4/WAN, LAN3, LAN2, LAN1: Through these ports, you can connect the modem router to

your PC or the other Ethernet network devices. Enable EWAN function and you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
WiFi: The switch for the WiFi function. Move it to left /right to enable/disable the WiFi function.

WPS: The switch for the WPS function. For details, please refer to

RESET: There are two ways to reset the modem router's factory defaults.

Method one: With the modem router powered on, use a pin to press and hold the Reset
button for at least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the modem
router's Web-based Utility.
ON/OFF: The switch for the power.

POWER: The Power plug is where you will connect the power adapter.

Antennas: Used for wireless operation and data transmit.

300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 1-2
6
2.3 Connecting the
4.7.2 WPS Settings.